TermDefinitionTags
Angle Corbels:The process of corbelling (projecting) a quoin, and occasionally an internal angle, to change its sh...
Apron:Projecting panel below a window sill. The panel may be ornamented or of a contrasting brick....
Basket Weave:Sets of three stretchers laid horizontally and vertically in alternate groups. They can be inclined ...
Battered Buttress:Sloping pier to increase the lateral strength of a wall. The bed joints of the Buttress are set at 9...
Block Bonded Quoin:The use of contrasting face bricks to create a series of alternating blocks (usually three courses h...
Bricknogging:A panel of face bricks used as an infill between the members of a timber frame. It is a decorative p...
Circular Work:Walls that are circular on plan. If the radius is large enough the wall can be bonded in the normal ...
Corbels:Projections that can be along the face of a wall, as a String Band (one to three courses), or at a q...
Crow Stepping:The finish to a gable wall, when there is a parapet, by a series of large horizontal steps as an alt...
Decorative Bonds:Used to add interest, and create a pleasing appearance, to external or internal walls; there is need...
Dentils:Also known as Dentilation. The projection (say 30mm) of alternate Headers, in the same course, to pr...
Diaper Pattern:Large plain areas of walling can be decorated by using blue-flared or vitrified headers to produce p...
Dog-Tooth:Similar to a Dentil Course but each Header is laid at 45 degs. to expose one corner in a continuous ...
Dressings:Decorative external brickwork that uses superior bricks, and workmanship, to surround a door or wind...
Dutch Gable:A gable with a parapet when the outline is shaped first with a large convex curve followed by an equ...
Gable Shoulder:May be known as a Springer and used at the foot of a brick gable when the roof is to be finished wit...
Gauged Work:The most skilled work of the craft. The bricks, known as Rubbers, are made oversize from a clay with...
Glass Block Work:See Bricks and Materials....
Herringbone Pattern:Created by setting the bricks, in alternate rows, at 90 degs. to each other but at 45 degs. to the h...
Lacing Course:One or two courses of brickwork to provide horizontal reinforcement in walls of flint or cobble....